

HOW TO UPLOAD NEW FIRMWARE IMAGE (.RST or .ALL file)
----------------------------------------------------

To upgrade your firmware, you will firstly need to install
the "Firmware Upgrade" utility. This is part of the 'router tools'
and once installed, you can normally find it under
" Start > Programs > Router Tools > Firmware Upgrade Utility ".

When the firmware upload completes, it will take up to 30 seconds to
actually write ('flash') the firmware, so wait until the LEDs return
to normal (ACT flashing alone).  Then you can go back into the 
router's web configurator and confirm the new firmware is installed.

The .ALL file will upgrade your firmware. The .RST file
will upgrade your firmware AND clear all settings back
to factory defaults.

See router FAQ on http://www.support.draytek.co.uk for more information.

