***************************************************************************
Release notes for Vigor3300V+

	Firmware Version 	: 2.6.3.0 (Release)
	Released Date		: 24th August 2010
	Build Date		: 18th August 2010
	Applicable Models	: Vigor3300V+
	Locale			: UK Only

***************************************************************************

Important Notes
-----------------------

- Upgrade firmware should be carried out by suitably informed/experienced persons. 
- Backup your router configuration BEFORE upgrading firmware
- Upgrading Vigor3300V+ firmware using the .all file will retain your existing router settings.  
- If in doubt, consult your dealer firstly.


[New Features]
1. Support for AES192 and AES256 on IPSec phase I.
2. Added "Comment" field to IP Filter rules.
3. GlobalView WCF license can now be activated from the WAN side.

[Improvement]
1. Fixed: NAT session numbers are different between Data Flow monitor and NAT Session table.
2. Fixed: Ringing timer error when FXS module is 1005~1008.
3. Fixed: Could not change password from the router's web interface.
4. Fixed: Resolved an issue with the router using the primary DNS IP to resolve Domain for HTTP Request Detection only.
5. Fixed: Possible connection problem when connecting a PC to a LAN port.
6. Improved: Added "Port Number" to the user access syslog output.
7. Improved: Added an option to enable or disable SNMP.
8. Improved: The TCP and UDP session timeouts can now be adjusted.


***************************************************************************
Release notes for Vigor3300V+

	Firmware Version 	: 2.6.2.0 (Release)
	Released Date		: 15th June 2010
	Build Date		: 9th June 2010
	Applicable Models	: Vigor3300V+
	Locale			: UK Only

***************************************************************************

New Features
1. Added “always on” feature for PPPoE WAN connections.
2. Added MAC address information to user access syslog output.
3. Added new telnet command, "ip bindmac show".
4. Support for GlobalView
5. Support for mOTP authentication for VPN users.

[Improvement]
1. Improved: IP verification mechanism in the WEB IP field.
2. Fixed: DHCP Over IPSec issue.
3. Fixed: Hotline did not work correctly in some circumstances.
4. Fixed: WAN Status display error.
5. Fixed: FXO packet detection problem.


***************************************************************************
Release notes for Vigor3300V+

	Firmware Version 	: 2.6.1.0 (Initial Release)
	Released Date		: 24th November 2009
	Build Date		: 4th November 2009
	Applicable Models	: Vigor3300V+
	Locale			: UK Only

***************************************************************************


[End of File]